HOW IT WORKS
The Airpura F600DLX air purifier utilizes a four-stage filtration process to help capture particles, chemicals, and gases. Air first passes through a pre-filter designed to capture large particles. The main filter houses twenty-six pounds of impregnated carbon, specifically designed to take care of formaldehyde and VOCs. The last layer is a true HEPA barrier filter that traps 99.97% of carbon dust and particles, as small as 0.3 microns. Filter should be cleaned once a month, depending on use and environment. Learn more from Airpura's F600DLX Fact Sheet
This is a great solution for those looking to remove formaldehyde, specific airborne chemicals, and VOCs. It is a cost effective way to bring immediate relief from a formaldehyde or VOC problem and is a good investment for the future health of you and your family. After the initial problem is resolved you may wish to replace the special carbon filter for conventional particle and airborne chemical filter combinations, for the same unit, to continue enjoying the benefits of clean air in your home. See our Chemical Air Purifier Guide to compare air purifiers for chemicals.
ADDITIONAL FEATURES
The Airpura F600DLX is made of powder coated steel in Montreal, Canada. It features simple-to-use dial control with infinite number of speeds. Casters allow you to easily move the purifier.
FILTER CHANGES
Filter changes require flipping the unit upside down, removing screws with a screwdriver. Then you must remove the used filters and replace the new filters according to the manual. After replacing the filters, the bottom panel needs to be screwed back on and the purifier turned back upright.
AIR FLOW AND POSITIONING
Air is pulled in from all directions around the sides of the air purifier and clean air is pushed out from 360 degrees around the top of the sides of the purifier. Place so that the sides of the air purifier are not blocked.
WHAT'S IN THE BOX
Unit- Size: 23" high x 15" diameter
- Weight: 49 lbs
- Pre-Filter
- Carbon Blend Filter
- HEPA-Barrier Filter
- Sleeve for Pre-Filters (Black units only)
OPTIONAL FEATURES
- 220V power supply (please specify in which country the unit will be operated)
- Wall Mount (vertical and horizontal mount available)