HOW IT WORKS
The Airmega 300 Air Purifier utilizes both an activated carbon filter and a HEPA filter in its design to improve your overall indoor air quality. After air passes through the pre-filters, it passes through the Green True HEPA Filters which traps pollen, allergens, and other airborne particles, followed by the activated carbon filter for odor removal.
ADDITIONAL FEATURES
The Airmega 300 features a particle sensor which allows the air purifier to automatically change to one of three filtration speeds to clean the air more efficiently. The Airmega 300 has a 1, 2, 4, or 8 hour shut-off timer as well as a handle to easily move the air purifier.
FILTER CHANGES
There is one HEPA Filter and a pre-filter on each side of the air purifier. The pre-filters can be removed by opening the side panels and using the plastic pull tabs on the pre-filter. It can be washed by vacuuming or rinsing under water. The filter indicator light can be reset by holding down the filter indicator button for 3 seconds.
The HEPA filters are changed by removing the side panels and using a tab on the top of the HEPA filter to pull the used filter out. Then simply place the new filter in and return the pre-filter and side panel. Reset the filter indicator by holding the filter indicator button for 3 seconds. HEPA filters should be replaced annually.
AIR FLOW AND POSITIONING
Air is pulled in from both sides of the air purifier and filtered air is blown out the top of the air purifier. Place the air purifier so as not to block the airflow on the sides or top of the air purifier.
WHATS IN THE BOX
Unit
- Size: 21.2” high x 13.6” wide x 13.6” deep
- Weight: 21.4 lbs
Filters and Accessories
- Washable pre-filter + Max2 filter set